Light Monkey - 15 Ah Heater Pack
Includes battery, canister, HCv2.0 integrated lid, E/O cord, and charger. Standard cord length is 12" (30.48 cm) custom lengths are available
- Powered by one 10.4Ah (115Wh) and one 5.2Ah (57.5Wh) Li-Ion batteries
- Length - 11" (28 cm)
- Diameter - 2.75" (7 cm)
- Dry Weight - 3.9 lbs (1.7 kg)
- Negative in Water - 1.3 lbs (.6 kg)
- Recharge time from complete discharge - 9 hours
- UN 38.3 Test Compliant
- BATTERY IS SAFE FOR AIR TRANSPORT
Heat Controller v2.0
HCv2.0 is the latest upgrade to our line of drysuit heating technology. As a modern improvement to our first design, this more robust controller board features a ramp up circuit to prevent voltage spikes from the inrush of current.
The heat controller is designed to go inline between a battery canister and heated drysuit systems, and is available lid-integrated or as a stand-alone unit. A lid with an integrated heat controller will be indicated by a tab of red heat-shrink on the cord.
It is recommended to use a HC integrated battery pack for heated undergarments ONLY. Plugging a light head into an E/O inline with a heat controller can cause damage to your light head and potentially void the warranty.
How it works - Light Monkey Heat Controller v2.0
When switching the power on, the output will be at 100%. By toggling the lid switch off/on, the power going to the heated undergarment is reduced, and burn time extended. Simply repeat this process until the ideal power level is reached. Power levels available are 100%, 80%, 60%, and 40%. To reset back to 100%, simply switch the canister off for ten seconds.
If utilizing a Stand-Alone HCv2.0, the indicator LED will flash for every dropdown in power.
- 100% - Indicator remains on
- 80% - 3 Flashes
- 60% - 2 Flashes
- 40% - 1 Flash
It is recommended to use a HC integrated battery pack for heated undergarments ONLY. Plugging a light head into an E/O inline with a heat controller can cause damage to your light head and potentially void the warranty.
