Light Monkey - 30 Ah Dual Output Heater Pack with Heater Controller v2.0
Light Monkey - 30 Ah Dual Output Heater Pack with Heater Controller v2.0
Includes battery, canister, Heat Control v2.0 integrated dual outlet lid, two E/O cords, and charger
Powered by three 10.4aH (115wH) Li-Ion batteries
Allows for a wide variety of light head and dry-suit heating equipment configurations
- Standard E/O cord lengths are 32" (81.28 cm) on lighthead side and 12" (30.48 cm) on heater side. Custom lengths can be ordered in the comment section at checkout.Â
- Length - 12.5" (31.75 cm)Â
- Diameter - 3.5" (8.89 cm)Â
- Dry Weight - 8.1 lbs (3.67 kg)Â Â
- Negative in Water - 1.6 lbs (.7 kg)
- Recharge time from complete discharge - 18 hours
- UN 38.3 Test Compliant - BATTERY IS SAFE FOR AIR TRANSPORTÂ
Light head not included!
Heat Controller v2.0
HCv2.0 is the latest upgrade to our line of drysuit heating technology. As a modern improvement to our first design, this more robust controller board features a ramp up circuit to prevent voltage spikes from the inrush of current.
The heat controller is designed to go inline between a battery canister and heated drysuit systems, and is available lid-integrated or as a stand-alone unit. A lid with an integrated heat controller will be indicated by a tab of red heat-shrink on the cord.
It is recommended to use a HC integrated battery pack for heated undergarments ONLY. Plugging a light head into an E/O inline with a heat controller can cause damage to your light head and potentially void the warranty.
How it works - Light Monkey Heat Controller v2.0
When switching the power on, the output will be at 100%. By toggling the lid switch off/on, the power going to the heated undergarment is reduced, and burn time extended. Simply repeat this process until the ideal power level is reached. Power levels available are 100%, 80%, 60%, and 40%. To reset back to 100%, simply switch the canister off for ten seconds.
Â
If utilizing a Stand-Alone HCv2.0, the indicator LED will flash for every dropdown in power.
- 100% - Indicator remains on
- Â 80% - 3 Flashes
- Â 60% - 2 Flashes
- Â 40% - 1 Flash
It is recommended to use a HC integrated battery pack for heated undergarments ONLY. Plugging a light head into an E/O inline with a heat controller can cause damage to your light head and potentially void the warranty.Â
